The Climbing Frame Factory

+44 (0)330 808 0579

The Climbing Frame Factory

+44 (0)330 808 0579

The Climbing Frame Factory

+44 (0)330 808 0579

Angle/Post Anchor (Set 16 pcs.)

For climbing frames and swings (extremely sturdy)

Art.No: 640197

Delivery : 3 - 5 working days

Regular Price: £169.95

Special Price £126.95

Incl. 20% VAT. From £50.- Free delivery*

Product Description

Details

Angle/Post Anchor (Set 16 pcs.)

The hot-dip galvanised Wickey angle/post anchors make your climbing frame or swing particularly stable. The anchor can be assembled quickly and easily on the inside of the post and ensures that the post is stabilised in all directions. Thanks to its shape, the Wickey angle anchor can also be used for climbing frames with sandpits. The special factor: the posts stand on a support plate after assembly. This protects the wood from direct contact with the soil and allows it to dry faster.

  • Angle Anchor made of hot-dip galvanized steel
  • Dimensions 50x4.5x4.5 cm, thickness 3 mm, bore hole Ø10 mm
  • Incl. 48 hexagon head wood screws Ø8x45 mm
  • Incl. 48 M8 washers
  • Incl. 48 end caps
  • Product weight: 16.8 kg
  • Post thicknesses 7x4.5 cm, 9x4.5 cm, 7x7 cm and 9x9 cm
  • Set for setting in concrete
  • Perfect for climbing frames with sand pits, angle anchors mounted on the inside
  • Extremely weather-resistant
  • Quality and safety tested
  • All measurements shown are approximate

Tips & Tricks

Grundanker beschreibung

Mounting-Tips:

  • Install the play tower and place it on the designated space. Please keep a safe distance in accordance with the installation instructions.
  • Mark all of the tower posts on the ground and dig frost-proof holes (Ø30 x D50 cm) into the soil.
  • Position the climbing frame and install all the anchors, if possible on the hidden side.
  • Support the anchor with stones or the play equipment with wooden wedges until the frame is level.
  • Pour concrete up to about 10 cm below the surface. When it is dry, the remaining hole can be filled with topsoil.
Ground Anchor

Ground Anchor

  • Simple and fast mounting
  • Attractive design: attaches onto the inside so that the anchors are not visible from the outside
  • Stable: Stabilises the post in all directions
  • Mounting is possible without concrete, but we do recommend using it.
  • Not suitable for the WickeyFlyer series

Safety Ground Anchor

Safety Ground Anchor

  • Simple and fast mounting
  • Attractive design: attaches onto the inside so that the anchors are not visible from the outside
  • Very stable: Stabilises the post in all directions
  • Secure using concrete
  • Suitable for any play frame

Angle/Post Anchor

Angle/Post Anchor

  • Simple and fast mounting
  • Attractive design: attaches onto the inside so that the anchors are not visible from the outside
  • Very stable: Stabilises the post in all directions
  • Secure using concrete
  • Suitable for any play frame

H-Anchor

H-Anchor

  • Complex assembly: Planks from the sandpit should be sanded
  • Most stable solution: Stabilises the post in all directions
  • Secure using concrete
  • Not suitable for inclined ladders, stairs and WickeyFlyer series

 

Get the best tips on our wooden products here

Like every natural product, wood also has individual characteristics. Here you can find out more about the typical wood characteristics of our products.

Salt efflorescence

Salt efflorescence

  • Superficial white to greenish spots
  • Mixture of exiting resin and ingredients of pressure impregnation
  • Fades over time due to the weather

Tip: Strongly affected areas can be easily sanded!


Cracks and branches

Cracks and branches

  • Branches, grains and pith are part of the characteristics of the wood
  • Dry cracking is permitted according to DIN 4074

Tip: Cracks with ¼ of the length and ¼ of the width are statistically harmless!


Swelling and shrinking

Swelling and shrinking

  • Volume change due to moisture absorption/drying is typical of wood
  • To ensure accurate assembly, not all wooden parts are pre-drilled due to possible wood warping

Tip: Unpack your wood immediately and let it dry for at least 2 days before assembly!